Home » Uncategories » Konfigurasi RIP Routing 4 Router dan 4 PC Pada Cisco Packet Tracer

Konfigurasi RIP Routing 4 Router dan 4 PC Pada Cisco Packet Tracer

ALAT DAN BAHAN:
  • Router Generic-PT (4)
  • PC (5)
  • Kabel Serial, Fiber dan Cross
TOPOLOGI:
 LANGKAH KERJA:
1. Buat topologi seperti diatas sesuai alat dan bahan yang tercantum dan sambungkan kabel ke masing-masing perangkat agar bisa terhubung.

2. Setelah tersambung, Masukan IP ke dalam jaringan yang terhubung Router 1, 2, 3 dan 4 seperti konfigurasi dibawah:
*R1
Router>ena
Router#conf t
Router(config)#int se2/0
Router(config-if)#ip add 12.12.12.1 255.255.255.252
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int se3/0
Router(config-if)#ip add 41.41.41.1 255.255.255.252
Router(config-if)#clock rate 9600
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
*R2
Router>ena
Router#conf t
Router(config)#int se2/0
Router(config-if)#ip add 23.23.23.2 255.255.255.252
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int se3/0
Router(config-if)#ip add 12.12.12.2 255.255.255.252
Router(config-if)#clock rate 9600
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa4/0
Router(config-if)#ip add 24.24.24.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
*R3
Router>ena
Router#conf t
Router(config)#int se2/0
Router(config-if)#ip add 34.34.34.1 255.255.255.252
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int se3/0
Router(config-if)#ip add 23.23.23.1 255.255.255.252
Router(config-if)#clock rate 9600
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 30.30.30.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
*R4
Router>ena
Router#conf t
Router(config)#int se2/0
Router(config-if)#ip add 41.41.41.2 255.255.255.252
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int se3/0
Router(config-if)#ip add 34.34.34.2 255.255.255.252
Router(config-if)#clock rate 9600
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 40.40.40.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#int fa4/0
Router(config-if)#ip add 24.24.24.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex

3. Kemudian, Agar saling terhung dari PC 1 ke PC lainnya kita menggunakan konfigurasi Routing RIP, Lakukan pada semua Router (Cara Static Routing sudah pernah bisa cek disini Konfigurasi Static Routing) 
*R1
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#net 10.10.10.0
Router(config-router)#net 12.12.12.0
Router(config-router)#net 41.41.41.0
Router(config-router)#no auto-summary 
*R2
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#net 20.20.20.0
Router(config-router)#net 12.12.12.0
Router(config-router)#net 23.23.23.0
Router(config-router)#net 24.24.24.0
Router(config-router)#no auto-summary 
*R3
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#net 30.30.30.0
Router(config-router)#net 23.23.23.0
Router(config-router)#net 34.34.34.0
Router(config-router)#no auto-summary 
*R4
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#net 40.40.40.0
Router(config-router)#net 41.41.41.0
Router(config-router)#net 34.34.34.0
Router(config-router)#net 24.24.24.0
Router(config-router)#no auto-summary 

4. Kemudian pada semua PC pilih IP Configuration isi masing masing PC dengan IP dibawah:
PC  :       IP         Subnetmask   Gateway
PC1: 10.10.10.2 255.255.255.0 10.10.10.1
PC2: 20.20.20.2 255.255.255.0 20.20.20.1
PC3: 30.30.30.2 255.255.255.0 30.30.30.1
PC4: 40.40.40.2 255.255.255.0 40.40.40.1
5. Setelah semua konfigurasi selesei, Lakukan Ping/Messages dari PC1-2,3,4. Harusnya menghasilkan Reply/ Successful


Share on Facebook
Share on Twitter
Share on Google+
Share on LinkedIn

Subscribe to receive free email updates:

2 Responses to "Konfigurasi RIP Routing 4 Router dan 4 PC Pada Cisco Packet Tracer"

  1. hungryworm__10 Mei 2019 pukul 12.37

    Komentar ini telah dihapus oleh pengarang.

    BalasHapus
  2. DFC SEO24 Mei 2019 pukul 13.38

    I love visiting sites in my free time. I have visited many sites but did not find any site more efficient than yours. Thanks for the nudge! https://192-168-i-i.com/cisco-router-default-password/

    BalasHapus

Langganan: Posting Komentar (Atom)